Garden Border / Lawn Edging Mould

• Please note: you are purchasing the mould only.  The photographs showing the finished edging panels are for visual reference purposes.  The edging panels were made by us using the mould, so we know how well they work!
• Make your own concrete lawn/garden edging using this mould - a cost effective way to get great looking garden edging, especially if you need a lot!
• The mould is manufactured from LDPE (low density polyethylene) which is a lightweight plastic material noted for its flexibility and toughness making it durable and reusable.
• Easy to to use.  We used a mix of sharp sand and concrete with great results.  The beauty of making your own edging panels is that you can make them exactly as you want them.  Colour the concrete to match your garden scheme, make as many as you need - we have used some cement dye pigment to make the terracotta panel.
• The process is simple : mix your concrete according to the instructions on the packaging.  Lay the mould on a flat surface open side up.  Fill with the concrete mix, smooth off the surface.  Leave to set fully.  Remove from the mould.  If you are making large quantities we offer a pack of 5 moulds, so you can make a few with one batch of concrete.  
• Overall approximate dimensions of the finished edging piece:
  • Height : 17 cm
  • Length : 29.5cm
  • Depth   : 4 cm
• Purchase as a single mould or a pack of 5.
• Designed and manufactured by Linic Plastics Ltd in Leicestershire, UK and brought to you by Proops Brothers Ltd.